WATERPROOFING
Cementitious Waterproofing
Chemical waterproofing is the process of making waterproofing or water resistant structure building. It provides excellent bonding to the walls, roofs and water tanks. It is modern technology process. Chemical waterproofing is very economical, affordable and cost effective process.
Acrylic Waterproofing
Liquid membrane is a thin coating which consists of usually a primer coat and two coats of top coats which are applied by spray, roller, or trowel. It offers more flexibility than the cementitious types of waterproofing. The liquid cures into a rubbery coating on the wall. The elongation properties of the coating can reach as high as 280%. Liquid waterproofing membrane is available in the form of liquid and is sprayed or applied by brush or roller to the concrete surface which forms a thick joint free membrane in contact with air.
Polyurethane Waterproofing
Polyurethane Coating is higher than Cementatious and Acrylic coatings, It normally has the 600% Elongation. Liquid waterproofing membrane is available in the form of liquid and is sprayed or applied by brush or roller to the concrete surface which forms a thick joint free membrane in contact with air.
Bituminious Waterproofing
Bitumen / Membrane treatment waterproofing is used to protect residential and commercial buildings. It is used protects the roof deck from rain. It provides an extra weather barrier or water penetration through the roofing. This system is normally used below ground level.